Mirage Systems, Inc.

Sizing data is determined by canopy pack volume studies and pack tray area calculated by Mirage Systems. Results may vary. Make sure you read the feedback left by other customers. You can also submit your own feedback.

All canopy fits were determined using a 9 cell zero-p canopy for comparison for the main and a PD 7 cell f-111 for the reserve. Hybrid canopies or 7 cell canopies can usually fit one size larger than what the scale says. Crossbraced canopies usually pack 15% (or one size larger) than nine cell mains so plan accordingly.

Please use common sense as not all canopies will be listed. If the only canopy listed is "soft" more than likely the one size larger canopy will be the optimum fit for that container. Also, if there are two sizes listed as "optimal" then they are probably not quite too small but not quite completely filling out the tray and both would work fine. Do not take these as gospel but as a rough guide, please look at customer's in the field who have left feedback when making your determination. We at the factory can only recommend these sizes safely however you may find that customer's in the field have used other combinations just fine.

The factory only recommends getting two sizes of main and reserve for your container. We recommend only one downsize per container therefore, there will be an "optimum" fit and a "soft" fit with the "soft" fit being the downsized canopy recommended by Mirage Systems, Inc.